Pellet central heating boilers with a feeder are a convenient and environmentally friendly solution. They are very efficient in operation and, just as importantly, energy-efficient. Thanks to this, the investment in a new central heating boiler pays for itself quickly. ** The Texas boiler is included in the list of ZUM (Green Equipment and Materials) by which you can get the highest possible subsidy for it in the Clean Air program.** The form in which you buy pellets is also convenient. It is available in large bags and is packaged in 15 kg. The device is equipped with a boiler exchanger made of certified boiler steel, a hopper with the possibility of installation on two sides, a door prepared for installation on two sides as a standard, a set for cleaning the boiler exchanger, and a system for automatic cleaning of the pellet burner, which reduces handling to a minimum. There is a 5-year warranty on the tightness of the exchanger.
Pellet boilers
Pellet TexasNEW
Compact ecology and convenience
Pellet Texas is a modern pellet boiler designed for users looking for an efficient and ecological heating source for single-family homes and buildings of different areas. The design of the unit is based on proven solutions known from the Pellet Vegas II model, but changes have been made to improve installation ergonomics and comfort.
The most important feature of the Pellet Texas boiler is the placement of the automatic pellet burner directly under the fuel hopper. Such a solution made it possible to significantly reduce the size of the device and create a compact design, which is ideal for small or hard-to-reach boiler rooms. This makes it much easier to install the boiler even in rooms with limited space.
The device uses wood pellets as a renewable fuel, which translates into high energy efficiency and low emissions. The use of an automatic feeder makes the combustion process fully controlled, and boiler operation is limited to a minimum.
** The Pellet Texas boiler is listed on the ZUM (Green Equipment and Materials) list and has particulate emissions below 20 mg/m3 of flue gases thanks to this, the boiler can receive the highest possible subsidy under the "Clean Air" program.
Pellet Texas
Advantages of the boiler
- Warranty
- for the tightness of the exchanger - 60 months
- Compact design
- By moving the burner under the storage tank, the boiler is ideal for boiler rooms with limited space
- Horizontal exchanger
- Horizontal exchanger made of certified 6mm sheet metal with manual cleaning
- Resource
- With the possibility of mounting on the side chosen by the customer
- Stalmark burner
- With self-cleaning grate and firing function
- Tech's controller
- Fully tactile and intelligent control with expandable accessories
Characteristics
Type of boiler: with feeder.
Tank: 10 kW - 110L, 15 kW - 190L, 20 kW - 230L.
Available capacities: 10 kW, 15 kW, 20 kW.
5 emission class: 10 kW, 15 kW, 20 kW.
Reduced dust emissions of less than 20mg: 10 kW, 15 kW, 20 kW.
Ecodesign: 10 kW, 15 kW, 20 kW.
Fuel type: wood pellets 6 - 8 mm.
Energy efficiency: A+.
Controller: ST 978T
Guarantee: 5 years for exchanger tightness.
Standard equipment:.
- ST 978T controller supporting 5 pumps, 2 mixing valve actuators and 2 room controllers.
- self-cleaning burner
- igniter
- external sensor
Equipment additionally paid:.
- WIFI RS module
- room controller ST 281
- control of second mixing valve
Boiler data
Pellet Texas
Move to read data
| BOILER POWER [kW] | BOILER HEATING AREA [m2] | MAX HEATING AREA [m2] |
|---|---|---|
| 10 | 1.24 | up to 125 |
| 15 | 1.69 | up to 185 |
| 20 | 2.30 | up to 250 |
Technical data of the boiler
Pellet Texas
Move to read data
| Parameter | kW | 10kW | 15kW | 20kW |
| Nominal Power | kW | 10 | 15 | 20 |
| Power Range | kW | 3.0-10 | 4.5-15 | 6.0-20 |
| Heating Surface Area | m2 | 1.24 | 1.69 | 2,30 |
| Heated Room Area* | m2 | up to 125 | up to 185 | up to 250 |
| Maximum Allowable Operating Pressure | MPa | 0.25 | 0.25 | 0.25 |
| Required Flue Draft | Pa | 10 | 15 | 20 |
| Single Fuel Hopper Fill** | l | 110 | 290 | 230 |
| Water Supply Temperature [min./max.] | °C | 60/80 | 60/80 | 60/80 |
| Minimum Return Water Temperature | °C | 45 | 45 | 45 |
| Boiler Weight | kg | 210 | 265 | 320 |
| Boiler Water Capacity | l | 40 | 53 | 73 |
| Minimum Chimney Height | m | 5.5 | 6 | 6 |
| Boiler Efficiency | % | 90.5 | 91,1 | 91,8 |
| Flue Outlet Dimensions | ∅ or mm | 160 | 160 | 180 |
| Supply and Return Diameter (Internal Threaded Fittings) | in | 1" | 1" | 1" |
| Electrical Supply | V/Hz | 230 /50 | 230 /50 | 230 /50 |
| Average Power Consumption of the Boiler | W | 25 | 31 | 37 |
| Energy Efficiency Class | - | A+ | A+ | A+ |
| Class 5 | - | yes | yes | yes |
| Ecodesign | - | yes | yes | yes |
*the area given refers to the heating power requirement of 80W/m2.
Pellet Texas
Pellet central heating boilers with automatic feeders provide a convenient and environmentally friendly solution for heating buildings. The Pellet Texas boiler, like the models of the Vegas family, meets the requirements of a high emission class and is included in the list of ZUM (Green Appliances and Materials), which makes it possible to obtain high subsidies in the "Clean Air" program.
The unit is equipped with a durable exchanger made of certified boiler steel, which ensures its high resistance and long service life. The design of the boiler also includes a practical fuel tank and a door that can be mounted on two sides, making it easy to fit the unit into the layout of the boiler room. A heat exchanger cleaning kit and an automatic pellet burner cleaning system are also included as standard, which significantly reduces the need to service the unit. The manufacturer provides a 5-year warranty on the exchanger's tightness.
